Cable-related / set model accessories

Items included in the motor option with an electromagnetic brake

When you select the motor option with the electromagnetic brake, the driver seems to be provided together,
but what specifically comes with it? Please tell me about the attached cable.

◆ CAVE-X series
・driver: RKSD 503M-A (made by Oriental Motor)
・electromagnetic brake cable (3 m) / motor cable (3 m) set: CC030 VPFB (made by Oriental Motor)
・ sensor cable (2 m): HR10AP-SA- 6-2
* The above cable is a fixed cable.

◆ PG series
・driver: RKSD 503M-A (made by Oriental Motor)
・electromagnetic brake cable (3 m) / motor cable (3 m) set: CC030 VPFB (made by Oriental Motor)
・sensor cable [limit / proximity origin] (2 m): PG-H-ASSY 5-2000
(Slit origin sensor: PM-L25 (with 1 m cable)
* The above cable is a fixed cable.

◆ Slide Guide (KXS) Series
・Driver: RKSD 507 M-O (Oriental Motor Co., Ltd.)
・Electromagnetic Brake Cable (3 m) / motor cable (3 m) set: CC030 VPFB (made by Oriental Motor)
・sensor cable (2 m): D214-1-2EK
* The above cable is a fixed cable.

Items included in α step motor option

When you select the motor option of α step, the driver seems to be provided together,
but what is specifically attached? Please tell me about the attached cable.

◆ CAVE-X series
・driver: ARD-K (made by Oriental Motor)
・motor cable (3 m): CC030VA2R2 (movable cable)
・sensor cable (2 m): HR10AP-SA-6-2 (fixed cable)

◆ PG series
・driver: ARD-K (made by Oriental Motor) ・Motor cable (3 m): CC030VA2R2 (movable cable)-Sensor
・cable [limit / proximity origin] (2 m): PG-H-ASSY 5-2000 (fixed cable)

◆ Slide Guide (KXS) Series
・Driver: ARD-A (Oriental Motor Co., Ltd.)
・Motor cable (3 m): CC030VAR (movable cable)
・Sensor cable (2 m): D214-1-2 EK (fixed cable)

Items included in servo motor option

When you select the servo motor option, the amplifier also seems to be provided together.
What specifically comes with it? Please tell me about the attached cable.

◆ CAVE-X(KXL) Series
・Amplifier：MR-J4-10A (Mitsubishi Electric Co., Ltd.)
・Motor cable (3 m)： SVPM-J3HF1-B-3-02S (movable cable)
・Encoder cable (3 m)： SVEM-J3HF1- B-3 (movable cable)
・sensor cable (2 m)：HR10AP-SA-6-2 (fixed cable)

◆ PG series
・Amplifier：MR-J4-10A (made by Mitsubishi Electric Corporation
・Motor cable (3 m)：SVPM -J3HF1-B-3-02S (Movable cable)
・Encoder cable (3 m)：SVEM-J3HF1-B-3 (Movable cable)
・Sensor cable [limit / proximity origin] (2 m)：PG-H-ASSY 5-2000 (Fixed cable)

◆ Slide guide (KXS) serie
・Amplifier：MR-J4-10A (made by Mitsubishi Electric Corporation)
・Motor cable (3 m)：SVPM-J3HF1-B-3-02S (movable cable)
・Encoder cable (3 m )：SVEM-J3HF1-B-3 (movable cable)
・Sensor cable (2 m)：D214-1-2 EK (fixed cable)

I want to know information such as thickness and bending radius of attached cable

Please tell me the thickness and minimum bending radius of the attached cable (model: D214-2-2RK).

◆ Robot cable
finish Outline: 6.70 ± 0.15 mm
(Conductor configuration: 50 pieces / 0.08 mm [24 AWG], conductor outer diameter: approx. 0.65 mm)
Minimum bending radius: R33 mm

Normal cables are as follows.
◆ Normal cable
finish Outline: 6.70 ± 0.15 mm
(Conductor configuration: 40 pieces / 0.08 mm [24 AWG], conductor outer diameter: approx. 0.65 mm)
Minimum bending radius: R33 mm

What is the cable set for DC24V input driver used for?

What is the following cable set used for?
◆ Product name: Cable set for DC24V input driver
◆ Model: LCS04SD5 / LCS02CFK(discontinued product)

In order to connect each stage to the driver, it is necessary to crimp using the special tool for the attached connector, but if you use this Cable set for DC24V input driver, you can omit the crimping operation.

Following 3 cables with connectors all 600mm) are included in the Cable set for DC24V input driver
1) Driver and DC power supply
2) Driver and motor
3) Driver and host controller

The other side of cables are left without connectors, so please connect them using a terminal block etc.

Cable connection diagram shows sensor as DC5V

Looking at the cable (D214) connection diagram, the sensor power supply is 5 VDC,
but can it be used at 24 V?

There is no problem with use at 24V. The same cable is used for both sensor power supply 5V / 24V.

Is the cable extending from the main unit robot cable?

Is the cable extending from the body of the motorized stage a fixed cable? 
Or is it a movable cable (robot cable)?

It is a fixed cable.

When mounting in a place where the motorized stage itself moves, fix the connector
so that the cable does not bend or twist.

Cable connecting driver and host

We are considering to use 5-phase stepping motor driver CRD5107P or CVD507-K-A9.
How should I select the wiring cable when connecting to the control board or power supply?

■ Power Cable
Please use a power cable AWG22 (0.3mm ^ 2) cable.
■ I/O Cable
Please use the cable of I / O cable AWG24 (0.2mm ^ 2)-AWG22 (0.3mm ^ 2).


A dedicated crimping tool is required to assemble and wire the connector that comes
with the DC24V Type Input Driver.
There is a product with 600 mm cable crimped to the connector attached to the driver.

Model: LCS04SD5 (Cable set for DC24V input driver)

A set of three for driver and DC power supply, driver and motor, and driver and host controller.
As we can just plug in driver, we can use immediately.
There is no need for laborious connector and wire crimping work, no special crimping tool,
and driver damage due to incorrect wiring can be prevented.
* The other side of the driver is processed with loose wires.
* A dedicated crimping tool is required to assemble and wire the connector included with the DC24V driver.