Custom order / remodeling / alteration

I want to assembled to the XY and Shifts from the center position

We are considering using KXL06300-N2-FB assembled in XY.
Instead of being assembled at the center as in standard XY product like KYL 06300, we would like to
make it a shifted position (the center of the upper axis is overhung with respect to the lower axis).
Are there any problems in use?

As it is a product with a 300 mm stroke, displacement (deflection) may occur when the upper shaft moves.
We recommend using the support guide if you want to stabilize the accuracy.
Model: APW 6016A -390A
* Please note that the stage with a cover is different from the model with APW 6019A -390A.

Custom handling of alteration work (such as tap holes)

Is it possible to add alternation work (such as tap holes) to the stage?

Depending on the content, it will be considered as a custom order. 
Please contact our sales office for details.

INQUIRY FORM

Change to specified motor

Is it possible to replace the motor with other servomotor specified by us?

Depending on the content, it will be considered as a custom order. Please contact our sales office
for details.

INQUIRY FORM

About XY combination of PG430 / PG530 / PG650 / PG750

I have multiple PG430 (530 · 650 · 750) X-axis stages. By combining two of them, will it become
PMG430 (530 · 650 · 750) XY-axis stage?

If the 30 mm and 50 mm strokes of the PG series are assembled on XY as they are, they will interfere.

* The PMG430 / 530/650/750 series avoids interference through the intermediate plate.
  Also, since the XY axis is a combination of L and R, the combination of L and R of PG does not have
   the same configuration as PMG.